Checking Gear Box Oil Level - Kubota ZG222A Operator's Manual

BChecking Gear Box Oil Level
To avoid personal injury:
A Always stop the engine and remove the key
before checking oil.
If serial numbers of mower are as indicated below
RCK48S-222Z:all
RCK48P-222Z:30000 and below
RCK54P-227Z:30000 and below
RCK60P-227Z:30000 and below
1. Park the machine on a flat surface and lower the
mower to the ground.
To check the oil level, loosen the check plug and check
to see if the oil level is in the range of the check plug
port.
If the level is too low, add new oil to the prescribed
level at the oil inlet.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
2. After checking, reinstall the check plug and oil inlet
plug securely.
(1) Check plug
(2) Oil inlet plug
PERIODIC SERVICE
(1) Drain plug
(2) Check plug
(3) Oil inlet plug
(4) Gear case
(5) Check plug port
49
(A) Oil level is acceptable within
this range.
(B) Oil level