Oiling; Every 100 Hours; Changing Engine Oil - Kubota ZG222A Operator's Manual

Table of Contents

Advertisement

52
PERIODIC SERVICE
BOiling
(1) Lift control cable (oil)
(1) Choke cable (oil)
(2) Throttle cable (oil)
(1) Choke cable (oil)
(2) Throttle cable (oil)

EVERY 100 HOURS

BChanging Engine Oil
To avoid personal injury:
A Be sure to stop the engine and remove the key
before changing the oil.
A Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
1. To change the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely. The
used oil can be drained out more easily if the engine is
warm.
(1) Drain plug
2. Fill with the new oil up to the upper level on the
dipstick.
(1) Engine oil port
(2) Oil level dipstick
3. To check the oil level. Remove the dipstick, wipe it
clean, insert it and draw it out again. Check to see that
the oil level is between the two marks.
(A) "UPPER LEVEL"
(B) "LOWER LEVEL"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zg227aZg222saZg227la

Table of Contents