Changing The Default Settings; Selecting An Instruction Sheet Language; Selecting Items And Changing Settings - Epson LQ-2170 User Manual

Changing the Default Settings

The default settings control many basic functions of the printer.
While you can control many of these functions through your
software or printer driver, you may sometimes need to change a
default setting from the printer's control panel through the Default
Setting mode.
To enter Default Setting mode, hold down the
turning on the printer. The printer prints an instruction sheet.
Follow the instructions on this sheet, and in this section, to change
settings using the Default Setting mode.
Selecting an
Follow these steps to select the language in which you want to
print the rest of the Default Setting mode instructions:
1. Press the
language you want to select.
2.
Press the
3.
Press the
items
Selecting
Follow the steps below to select items and change their settings.
The available items and settings are listed on the instruction sheet
and in the table on the next page.
1. Press the
you want to change.
2.
Press the
for that item is indicated by the
lights.
instruction sheet language
Pitch
button until the
Tear Off/Bin
button to save your selection.
Font
button to print out the instruction.
and changing settings
Pitch
button until the
Tear Off/Bin
button until the setting you want to use
Pitch
Pitch
lights indicate the
Pitch
lights indicate the item
Tear Off/Bin
and
Using the Printer
button while
Pause
3-7