Buttons - Epson LQ-2170 User Manual

24-pin dot matrix printer
Hide thumbs Also See for LQ-2170:
Table of Contents

Advertisement

Pitch
(three lights, green)
The pitch selection status is displayed by three pitch lights:
n
= On,
Note:
All
the lights above me on when a
of

Buttons

Operate
Press this button to turn the printer on or off.
Pause
Press this button to temporarily stop printing and to resume
printing. Holding it down for at least 3 seconds when the printer
is in the standby mode enables the micro adjust function. Pressing
it again disables this function. See "Micro Adjust" later in this
chapter for details.
Load/Eject
Press this button to load single-sheet or continuous paper to the
loading position. However, the printer normally loads paper
automatically. If single-sheet paper is already in the loading
position, use this button to eject the sheet. If continuous paper is
in the loading or tear-off position, press this button to feed it
backward to the standby position.
3-4
Using the Printer
10 cpi
12
cpi
15
cpi
17 cpi
20
cpi
PS (Proportional spacing)
= Off
error occurs.
fatal

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P910a

Table of Contents