Buttons And Functions - Epson ET-2810 Series User Manual

Guide to the Control Panel

Buttons and Functions

A
Turns the printer on or off.
Unplug the power cord after checking that the power light is off.
B
When a network error occurs, pressing this button cancels the error. Hold this button down for more than 5
seconds to perform Wi-Fi auto setup using the WPS push button.
C
Prints a network connection report allowing you to determine the causes of any problems you may have using the
printer on a network. If you need more detailed network settings and connection status, hold this button down for
at least 7 seconds to print a network status sheet.
D
Starts monochrome copying on A4 size plain paper. To increase the number of copies (by up to 20 copies), press
this button within one second intervals.
E
Starts color copying on A4 size plain paper. To increase the number of copies (by up to 20 copies), press this
button within one second intervals.
F
Stops the current operation.
Hold this button down for five seconds until the
Functions of Button Combinations
Additional functions are available with different combinations of buttons.
+
+ or
+
+
+
>
Buttons and Functions
Check Scanned Images
Press the and buttons simultaneously to run software on a USB-connected computer
and check scanned images.
Copy in Draft Mode
y
Press the and the or
For users in Western Europe, draft mode is not available.
PIN Code Setup (WPS)
Hold down the and buttons simultaneously to start PIN Code Setup (WPS).
Wi-Fi Direct (Simple AP) Setup
Hold down the and
Restore Default Network Settings
Turn the printer on while holding down the
When the network settings are restored, the printer turns on and the network status lights flash
alternately.
P
button flashes to run print head cleaning.
buttons simultaneously to copy in draft mode.
buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
button to restore the default network settings.
19