Operation Through The Irc Controller - ProLights FLATCOB40 User Manual

14

3.16 OPERATION THROUGH THE IRC CONTROLLER

To control the FLATCOB40/80 with the infrared remote control:
• Press the button MENU repeatedly until SET, then press button ENTER to confirm.
• Using UP/DOWN button to select On or Off to enable or disable the infrared remote control.
• Press the button ENTER to confirm the chose.
NOTE - Make sure to point the controller directly at the receiver on the product.
IRC REMOTE
BLACK
AUTO SOUND
OUT
SENSI-
STROBE SPEED
TIVITY
%
FADE
MANUAL
G B
R
UV W
A
+ 0
3
1 2
4 5 6
7 8 9
Fig.8
Manual Color Control
To choose a specific color with the controller:
1. Press MANUAL on the controller.
2. Press any number between 0-9 to choose your color.
To manually control the RGB percentage:
3. Press MANUAL on the controller.
4. Press R, G, or B to choose your color.
5. Press + or – to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press STROBE on the controller.
2. Press + or – to increase or decrease the strobe rate.
3. Press STROBE again to turn off the strobe.
To change the switching effect of the program:
• Press FADE/SNAP on the controller.
• Fade will slowly switch the effect. Snap will rapidly switch the effect.
To black out the lights:
• Press BLACK OUT on the controller.
• This will turn off all the lights until the button is pressed again.
NOTE - The controller will not respond to any inputs when Black Out is activated. If the remote does not
respond when a button is pressed, try pressing BLACK OUT. You may have inadvertently activated BLACK
OUT.
FLATcoB40/80
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the
product.
To turn on Automatic Mode:
1. Press AUTO on the controller.
2. Press + or – to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press SPEED on the controller.
2. Press %.
3. Press + or – to either increase or decrease the speed of the program.
Sound Active Mode
Sound Active Mode will enable the product to respond to the music.
To turn on Sound Active mode:
1. Press SOUND on the controller.
To adjust sound sensitivity in Sound Active mode:
1. Press SENSITIVITY on the controller.
2. Press %.
3. Press + or – to either increase or decrease sound sensitivity.