Operation Through The Irc Controller - ProLights TRIBE VISUALGOB User Manual

12

3.12 OPERATION THROUGH THE IRC CONTROLLER

To control the VISUALGOB with the infrared remote control:
• Press the button MENU repeatedly until SET, then press button ENTER to confirm.
• Using UP/DOWN button to select On or Off to enable or disable the infrared remote control.
• Press the button ENTER to confirm the chose.
NOTE - Make sure to point the controller directly at the receiver on the product.
IRC REMOTE
BLACK
AUTO SOUND
OUT
STROBE SPEED
%
MANUAL
R G
A UV
+ 0
1 2 3
4 5 6
7 8 9
Fig.8
Projection effects
1. Press AUTO on the controller.
2. Press + or – to choose between the different projection effects.
To adjust the speed of projection effects:
SENSI-
1. Press SPEED on the controller.
TIVITY
2. Press + or – to either increase or decrease the speed of rotation.
FADE
B
Brightness manual control
1. Press MANUAL on the controller.
W
2. Press + or – to increase or decrease the brightness.
Miscellaneous Operation
To black out the lights:
• Press BLACK OUT on the controller.
• This will turn off all the lights until the button is pressed again.
NOTE - The controller will not respond to any inputs when Black Out is acti-
vated. If the remote does not respond when a button is pressed, try press-
ing BLACK OUT. You may have inadvertently activated BLACK OUT.
VISUALGOB