Installing An Sfp Or Sfp+ Transceiver; Table 3: Optional Transceivers; Figure 16: Inserting An Sfp Transceiver Into A Slot - Edge-Core ECS4510-28T Installation Manual

I
NSTALLING AN

Figure 16: Inserting an SFP Transceiver into a Slot

These switches support the following optional transceivers:

Table 3: Optional Transceivers

SFP
1000BASE-SX (ET4201-SX)
1000BASE-LX (ET4201-LX)
1000BASE-ZX (ET4201-ZX)
To install an SFP or SFP+ transceiver, do the following:
Consider network and cabling requirements to select an appropriate
1.
transceiver type. See
Insert the transceiver with the optical connector facing outward and the slot
2.
connector facing down. Note that SFP and SFP+ transceivers are keyed so
they can only be installed in one orientation.
3. Slide the transceiver into the slot until it clicks into place.
SFP SFP+ T
OR
10GBASE-SR (ET5402-SR)
10GBASE-LR (ET5402-LR)
10GBASE-ER (ET5402-ER)
"Connectivity Rules" on page
– 43 –
C 3
| Installing the Switch
HAPTER

Installing an SFP or SFP+ Transceiver

RANSCEIVER
SFP+
53.