Lectrosonics M2R Instruction Manual page 12

M2R
Flex List
FlexList allows the user to set up a list of profiles, by
name, to quickly and easily listen to any of the mixes
on site individually.
Listen - choose a mix from the list and hear what is
transmitting
Add - add a mix to the available Flex List
(action performed via the IR port)
Update - Update settings in a mix (frequency, etc.).
Action performed via the IR port.
Delete - Remove a mix from the Flex List
Clear All - Remove all mixes from the Flex List
12
Share List - Share Flex List from one M2R to another
via IR port.
Frequency
Allows manual selection of the operating frequency in
MHz and KHz, tunable in 25 kHz steps.
Vol/Bal
Displays the volume, from 0 to 100, Locks or Unlocks
the volume control (lock shown on main screen) and
adjusts the balance to left, right or center.
Volume locked display on main
screen
Mixer
This screen allows you to choose a stereo mix, mono
mix from either audio channel 1, channel 2 or both, or
custom, allowing for varied width of the signal and how
much level from each channel.
The available modes are:
• Stereo
• SwapLR
• Custom
• Mono 1&2
• Mono Ch 2
LECTROSONICS, INC.