Motherboard Features - Supermicro X11SPG-TF User Manual

Super X11SPG-TF User's Manual

Motherboard Features

CPU
•
Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx series (Socket P0-LGA3647)
processor with a thermal design power (TDP) of up to 205W and 28 cores
Note: The X11SPG-TF motherboard does not support FPGA or Fabric processors.
Memory
•
Up to 384GB of RDIMM, 768GB of LRDIMM, and 1.5TB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of
up to 2933MHz in six memory slots
Note 1: Memory speed support depends on the processors used in the system.
Note 2: 2933MHz memory is supported by the 82xx/62xx series processors only.
DIMM Size
•
Up to 256GB at 1.2V
Note 1: Memory capacity and frequency is CPU dependent.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C621
Expansion Slots
•
Three (3) PCI-Express 3.0 x16 Slots (CPU Slot 3, SXB1A/SXB1B Slot, SXB2A/SXB2B Slot)
•
Two (2) M.2 for PCI-Express 3.0 x4 or SATA 3.0 Slot (Supports M-Key 2280)
Network
•
Intel Ethernet Controller X550 for 10G BASE-T Ports
•
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
•
ASpeed AST2500 BMC
Graphics
•
Graphics controller via ASpeed AST2500 BMC
Note: The table above is continued on the next page.
Motherboard Features
14