Table of Contents
Advertisement
Super X11SPG-TF User's Manual
SATA Ports
The X11SPG-TF has six SATA 3.0 ports (I-SATA4~7, S-SATA0~1) supported by the Intel C621
chipset. These SATA ports support RAID 0, 1, 5, and 10. SATA ports provide serial-link signal
connections, which are faster than the connections of Parallel ATA.
Note: Supermicro SuperDOMs are yellow SATADOM connectors with power pins built
in and do not require separate external power cables. These connectors are backwards
compatible with non-Supermicro SATADOMS that require an external power supply.
Overheat/Fan Fail LED Header
The JOH1 header is used to connect an LED indicator to provide warnings of chassis
overheating and fan failure. This LED will blink when a fan failure occurs. Refer to the tables
below for pin definitions.
Overheat LED Header
Status
State
Definition
Solid
Overheat
Blinking
Fan Fail
JUIDB1
LE1
USB1
USB0
VGA
Intel
Aspeed
X550
AST2500
LEDM1
BT1
1
5 6
M.2-H_1 PCI-E 3.0 X4
Intel
C621
2
3
JBT1
CPU
4
S-SGPIO1
I-SGPIO2
FAN4
FAN3
IPMI CODE
SAN MAC
MAC CODE
JPI2C1
LAN2
LAN1
IPMI_LAN
USB4/5(3.0)
MH10
MH12
SP1
LE3
LE4
M.2-H_2 PCI-E 3.0 X4
7
BIOS LICENSE
FAN2
FAN1
JL1
BAR CODE
Overheat LED
Pin Definitions
Pin#
Signal
Pull high to +3.3V
1
power through 330-ohm
resistor
2
OH Active
1. I-SATA4
2. I-SATA5
3. I-SATA6
4. I-SATA7
5. S-SATA0
6. S-SATA1
7. Overheat/Fan Fail LED
Header
54
Advertisement
Table of Contents
