Supermicro X11SPG-TF User Manual page 86

Super X11SPG-TF User's Manual
PCI-E Completion Timeout Disable
Use this feature to enable PCI-E Completion Timeout support for electric tuning. The
options are Yes, No, and Per-Port.
South Bridge

The following USB information will display:
•
USB Module Version
•
USB Devices
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled, Disabled,
and Auto.
XHCI Hand-off
When this feature is disabled, the motherboard will not support USB 3.0. The options are
Enabled and Disabled.
Port 60/64 Emulation
This feature allows legacy I/O support for USB devices like mice and keyboards. The options
are Enabled and Disabled.
PCIE PLL SSC
Use this feature to enable PCI-E phase-locked loop (PLL) spread spectrum clocking (SSC).
The options are Disable and Enable.
Server ME Configuration

The following General ME Configuration will display:
•
Oper. Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
86