Supermicro SuperServer 5019S-W4TR User Manual page 66

SuperServer 5019S-W4TR User's Manual
Graphics Configuration
Graphics Configuration
Primary Display
Use this feature to select the graphics device to be used as the primary display. The options
are Auto, PEG, and PCIE.
Primary PCIE
This feature allows the user to specify which graphics device to be used as the primary
graphics card. The option is Onboard.
DMI/OPI Configuration
DMI/OPI Configuration
The following DMI information will be displayed:
•
DMI
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled.
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are Enabled
and Disabled.
CPU DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and L1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enabled and Disabled.
DMI De-Emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6 dB and
-3.5 dB.
66