Table of Contents
Advertisement
SuperServer 5019S-W4TR User's Manual
Figure 3-2. Placing the Processor into the Socket
3. Use your thumb and your index finger to hold the edges of the processor. Align the CPU
key (the semi-circle cutouts) with the socket keys.
Figure 3-3. Inspecting the Processor Installation
4. Once aligned, carefully place the processor into the socket. Do not drop the processor
on the socket, move or rub the processor against the socket or against any socket pins,
which may damage the components.
5. With the processor inserted into the socket, inspect the four corners of the CPU to make
sure that it is properly installed and flush with the socket.
6. Carefully press the processor load lever down until it locks into its retention tab.
Bottom Edge
26
Top Edge
Advertisement
Table of Contents
