Table of Contents
Advertisement
Appendix B: System Specifications
Appendix B
System Specifications
Note: Unless noted specifications apply to a complete system (all serverboards).
Processors
Two E5-2600 v3 series processors per node in Socket R LGA 2011 type sockets
Note: please refer to our website for details on supported processors.
Chipset
One PCH C612 chipset per node
BIOS
128 Mb AMI BIOS® Flash EEPROM per node
Memory Capacity
Each node has up to sixteen DIMM slots supporting up to 1024 GB of
LRDIMM (Load Reduced DIMM) or 512 GB of RDIMM (Registered DIMM)
DDR4-2133/1866/1600 MHz registered ECC memory
Note: refer to Section 5-6 for details on installation.
Note: check the Supermicro website (www.supermicro.com) for the latest memory support
information.
SAS
LSI 3008 controller to support six SAS3 hard drives per node
SATA
Serial ATA controller integrated into the PCH C612 to provide six SATA3 hard
drives per node
Hard Drive Bays
The SuperServer 2028TP-HC0R/HC0TR/HC0FR contains 24 hot-swap drive
bays to house 24 standard SATA/SAS drives
PCI Expansion
The SuperServer 2028TP-HC0R/HC0TR/HC0FR has
one (1) PCI Express 3.0 x16 slot (Slot 1) available per node.
B-1
Advertisement
Table of Contents
