Section 2: Health And Safety Precautions; Safety Symbols; Safety Instructions - Pentair BIOSHIELD CLP41A6-XN Installation And User Manual

Commercial uv disinfection system
Table of Contents

Advertisement

2
SECTION TWO
HEALTH AND SAFETY PRECAUTIONS

Safety Symbols

Caution
Warning
Protective Eye wear (UV Light)
Recycle

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS PLEASE READ PRIOR TO INSTALLATION AND OPERATION
Strictly follow the instructions within this manual to ensure the health and safety of both, yourself and the UV system. The
installation, operation and maintenance of the Bioshield™ UV Disinfection System can only be carried out after reading and
understanding the information contained in this manual.
The installation of the UV system must be carried out in accordance with local regulations and codes.
WARNING:
DANGER:
IMPORTANT: READ AND OBSERVE ALL IMPORTANT NOTICES AND LABELS ON THE UNIT.
IMPORTANT: For your safety the quartz sleeve and/or the UV lamp in this product may have been
WARNING:
DANGER:
DANGER:
DANGER:
DANGER:
BIOSHIELD™ Commercial UV Disinfection System Installation and User's Guide
Water and electricity can be a dangerous combination. Help us ensure your safety.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
UV lamps and quartz sleeves are fragile and if broken and handled incorrectly may
cause serious injury.
REMOVAL OF PRODUCT LABEL WILL VOID WARRANTY!
broken or damaged during shipping. It is ESSENTIAL that the unit be CAREFULLY
INSPECTED BEFORE CONNECTING TO ELECTRIC POWER.
DO NOT exceed 150 PSI during operation.
To avoid possible electric shock special care should be taken since water is employed
in the use of the UV System. For each of the following situations, do not attempt repairs
yourself. Call Pentair Commercial Aquatics customer service department at
800-831-7133.
If the unit falls into the water, DO NOT REACH FOR IT! First unplug it and then retrieve
it. If the internal electrical components of the unit get wet, unplug the unit immediately.
If the unit shows any sign of water leakage, immediately unplug it from the power source.
DO NOT operate this unit if it has a damaged cord or plug, if it is malfunctioning, or if it
has been dropped or damaged in any manner.
High Voltage
Chemical (Corrosive)
Sharp Object

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents