Important Safety Precautions - Pentair IntelliChlor IC20 Installation And User Manual

ii

IMPORTANT SAFETY PRECAUTIONS

Important Notice:
about the installation, operation and safe use of this product. This information should be given to the
owner and/or operator of this equipment. When installing and using this electrical equipment, basic
safety precautions should always be followed, including the following:
RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS READ. AND
FOLLOW ALL INSTRUCTIONS.
Before installing this product, read and follow all warning notices and instructions
which are included. Failure to follow safety warnings and instructions can result in
severe injury, death, or property damage. Call (800) 831-7133 for additional free
copies of these instructions.
WARNING: To reduce the risk of injury, do not permit children to use this product unless they
are closely supervised at all times.
WARNING: When mixing acid with water, ALWAYS ADD ACID TO WATER. NEVER ADD
WATER TO ACID.
WARNING: To reduce the risk of injury, service should only be attempted by a qualified Pool
Service Professional.
WARNING: Do not operate electrolytic cell without proper flow or water circulation. A build-up
of flammable gases will result in hazardous conditions.
CAUTION - This chlorinator is for use with permanently-installed pools and may also be used
with hot tubs and spas if so marked. Do not use with storable pools.
A permanently-installed pool is constructed in or on the ground or in a building such that it cannot be
readily disassembled for storage. A storable pool is constructed so that it is capable of being readily
disassembled for storage and reassembled to its original integrity.
CAUTION - When using IntelliChlor with an IntelliTouch system, it is recommended to wire the
IntelliChlor Power Center to the pump side of the relay located in the IntelliTouch Load Center. This
wiring method does not require a ground fault circuit-interrupter (GFCI) to protect the circuit. A
green colored terminal (or a wire connector marked "G", "GR", "Ground" or "Grounding") is
provided within the terminal compartment in the Power Center transformer enclosure. To reduce
risk of electric shock, connect this terminal or connector to the grounding terminal of your electric
service or supply panel with a conductor equivalent in size to the circuit conductors supplying this
equipment. The power supply must be interconnected with pool pump motor power source. This
insures the IntelliChlor chlorinator and pool pump will switch on and off together.
IntelliChlor Installation and User's Guide
SAVE THESE INSTRUCTIONS
Attention Installer: This manual contains important information
WARNING: IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A