Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media - Brother Innov-is VE2300 Operation Manual

UPGRADING YOUR MACHINE'S SOFTWARE

UPGRADING YOUR MACHINE'S SOFTWARE

You can use USB media or a computer to upgrade software for your machine.
When an upgrade program is available on " http://support.brother.com/ ", please download the files
following the instructions on the website and steps below.
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used before starting to upgrade.
Upgrade Procedure Using USB
Media
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
 The following screen will appear on the LCD.
b
Press .
c
Insert the USB media into the USB port for
media/mouse on the machine. The media
device should only contain the upgrade file.
a USB port for media/mouse
b USB media
A-26
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
d
Press .
 The upgrade file is loaded.
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
e
Remove the USB media, and turn the
machine off and on again.