Reloading During Printing - Epson ActionPrinter 4000 User Manual

CAUTION: Never advance the paper using the platen
knob while the printer is turned on. If
it more firmly. Then press the
ON LINE
6. Press the
LINE
light is lit, the printer can accept data from your computer.
You are now ready to begin printing.

Reloading During Printing

When you print a document of more than
sheet paper, the printer stops printing when it reaches the bottom of
the page. When this happens,
automatically or remains on, depending on your application
program software. If the
you should do is press the
ON LINE
Once the
printed (if necessary, press
and load a new sheet. Press the
next page and follow any additional prompts from your software.
button to set the printer on line. When the
the ON LINE
ON LINE
ON LINE
light is off, remove the sheet
the LOAD/EJECT
ON LINE
the
LOAD/EJECT
one
page using single-
light either goes off
light remains on, the first thing
button to take the printer off line.
that
button to eject the page)
button to start printing the
Paper Handling 2-5
Using Single Sheets
platen turns
button again.
ON
has just been