Epson ActionPrinter 4000 User Manual page 191

Problem
Continuous paper
does not feed
properly.
LOAD/EJECT
When the
button is pressed, the
platen does not rotate
and paper does not
feed.
LOAD/EJECT
When the
button is pressed, the
platen rotates but
paper does not feed.
Solution
You may be trying to feed paper using the
control panel buttons while the printer is
(ON LINE
on line
LINE
button once to set the printer off line,
then try feeding paper. After feeding
paper, press the
set the printer on line. See Chapter 3.
The paper release lever may be pushed
back to the single-sheet position. When
using the tractor, be sure the paper
release lever is pulled forward to the
continuous paper position. See Chapter 2.
Continuous paper may have already been
in the paper path. (In this case, the paper
feeds backward to the standby position.)
LOAD/EJECT
Press the
the paper.
Paper Handling
light on). Press the
ON LINE
button again to
button again to load
Troubleshooting
ON
7-17