Reloading During Printing - Epson LQ-510 User Manual

CAUTION: Never advance the paper using the platen
knob while the printer is turned on. If the platen turns
without loading the paper, remove the paper and reinsert
it more firmly. Then press the LOAD/EJECT button again.
6. Press the ON LINE button to set the printer on line. When the ON
LINE light is lit, the printer can accept data from your computer.
You are now ready to begin printing.

Reloading During Printing

When you print a document of more than one page using single-
sheet paper, the printer stops printing when it reaches the bottom of
the page. When this happens, the ON LINE light either goes off
automatically or remains on, depending on your application
program software. If the ON LINE light remains on, the first thing
you should do is press the ON LINE button to take the printer off line.
Once the ON LINE light is off, remove the sheet that has just been
printed (if necessary, press the LOAD/EJECT button to eject the page)
and load a new sheet. Press the ON LINE button to start printing the
next page and follow any additional prompts from your software.
Using Single Sheets
Paper Handling 2-5