Reloading During Printing - Epson LQ-1050 User Manual

WARNING: Never advance the paper using the platen
knob except in
problem. Using the platen knob while the printer is on
may damage the printer and affect the loading and short
tear-off positions.
Note: If the platen turns without loading the paper, press
button to take the printer off line and completely remove
ON LINE
the paper. Then re-insert the paper more firmly.
If you need to adjust the position of the paper after it is loaded, use
the micro-adjustment feature described in Adjusting the Loading
Position in Chapter 3.
To eject the paper, press
line; then press
You are
now

Reloading During Printing

When you print a document of more than one page using single-
sheet paper, the printer stops printing when it reaches the bottom of
the page. When
automatically or remains on, depending on your application
program software. If the
do is press the
Once the ON LINE
printed (if necessary, press
Then load a new sheet to start printing
additional prompts from your software.
the case
the ON LINE
the LOAD/EJECT
ready to begin printing.
happens, the
this
ON LINE
ON LINE button to take the printer off line.
light is off, remove
the FORM FEED
of a paper jam or other paper feed
button to take the printer off
button.
light either goes off
ON LINE
light remains on, the first
sheet
the
button to eject
the next
the
thing you
has just been
that
the
page and follow any
Paper Handling 2-5
page).