Epson ActionPrinter 4000 User Manual page 52

Switching Between
0 t 0
CAUTION: Make sure you tear off your printed document
before pressing the
several pages at a time may result in a paper jam. This is
especially true for narrow paper (less than 6 inches or
152.4 mm wide).
3. LOAD/EJECT
Press the
backward out of the printer and into the standby position. The
paper is still attached to the tractor but no longer in the paper
path.
0 t .
CAUTION: Pressing the
feed the paper far back enough to reach the standby
position. If the
need to press the
width continuous paper, you can press the
button up to three times. If, however, you are using
narrow paper (between 4 and 6 inches or 101.6 and 152.4
mm) you should only press the
Also, do not use this button to eject labels.
WARNING: Never feed labels backward through the
printer. Labels can easily come off
2-14 Paper Handling
Continuous and Single Sheets
LOAD/EJECT
button to feed the continuous paper
LOAD/EJECT
PAPER OUT
LOAD/EJECT
button. Reverse-feeding
button once may not
light does not come on, you
button again. With normal-
LOAD/EJECT
LOAD/EJECT
button once.