Epson ActionPrinter 4000 User Manual page 202

Options
Problem
Using the cut sheet
feeder, the paper
does not feed
properly
(continued).
One page printing
of
has spread to two
pages.
Using the pull
tractor with the
push tractor,
continuous paper
does not feed
properly.
FORM FEED
The
LINE FEED
button was
pressed, but the paper
does not feed at all.
Platen does not
rotate.)
7-28
Troubleshooting
Solution
The page length setting may be wrong.
Run a self test in cut sheet feeder mode.
The printer will automatically measure
the paper loaded and set the correct page
length. See Chapter 5.
You may have to change the top or
bottom margin or page length for your
application program.
The printer may be on line. Before using
or
the control panel buttons to feed paper,
always put the printer off line
light out).
(ON LINE