Selecting Typestyles - Epson ActionPrinter 4000 User Manual

Selecting Typestyles

You can produce a wide range of typestyles by selecting different
character fonts, widths, and other enhancements from the SelecType
control panel or by using software commands. This section
describes only the features controlled by SelecType. To use software
commands, see the Command Summary in Chapter 9.
You can use the SelecType section of the control panel to choose
fonts and condensed printing. Orange lights indicate which features
you have chosen.
Note: The settings you select using the SelecType panel remain
valid until the printer is turned off or until it receives other
instructions from software. However, some application programs
are designed to control all typestyle functions. These programs
cancel all previous typestyle settings by sending certain software
commands before printing. Because these commands override
SelecType settings, you should use the program's print options
instead of SelecType to select your typestyles. If SelecType does
not work with a particular application, check your software
manual for instructions on selecting typestyles.
FONT
Using the Printer 3-17