Reloading During Printing - Epson ActionPrinter 3000 User Manual

Note: If the platen turns without loading the paper, completely
remove the paper and reinsert it more firmly. Then press the
AUTO LOAD
button again.
CAUTION: Never advance the paper using the platen knob
while the printer is turned on.
ON LINE
5. Press the
To eject the paper, set the printer off line (by pressing the
button) and then press the

Reloading during printing

When you print a document of more than one page using single
sheet paper, there are two ways your software may leave your
printer at the end of a page:
If your software sends characters in a continuous stream, the
l
printer stops printing when it reaches the bottom of the paper.
When this happens, the page ejects and the
off automatically.
If your software handles printing page by page, it probably
l
stops sending characters at the end of a page and prompts you
to insert more paper. In this case, the
on. If it does, press the
off line.
In either case, once the
has just been printed and load a new sheet as before. Press the
ON LINE
button to start printing the next page.
button to set the printer on line.
FORM FEED
ON LINE
button once to take the printer
ON LINE
light is off, remove the sheet that
Using Single Sheets
button.
ON LINE
ON LINE
light may remain
Paper Handling 2-5
ON LINE
light goes