Swing Gate Operator Specifications - Eagle 100 Series Installation & Owner's Manual

SWING GATE OPERATOR SPECIFICATIONS

Residential Swing Gate Operators
Model
Eagle-100 1/2 HP - 120 VAC - 5.7 amp
Input Power: 120/240 VAC (1 Phase)
Eagle-100-DC
Operator Power: 1/2 HP - 24 VDC
NOTE: Eagle-100
can handle
lite-commercial
duty as well as
residential.
Commercial Swing Gate Operators
Model
Eagle-200 1/2 HP - 120 VAC - 5.7 amp
Eagle-200-1HP 1 HP - 120 VAC - 10.5 amp
Eagle-200-DM (2) 1/2 HP - 120 VAC - 5.7 amp
Input Power: 120/240 VAC (1 Phase)
Eagle-200-DC
Operator Power: 1/2 HP - 24 VDC
Input Power: 120/240 VAC (1 Phase)
Eagle-200-DC-HD
Operator Power: 3/4 HP - 24 VDC
2
UL 325 Class I, II, III and IV
Motor Power Max Length Max Weight Control Board Operation
18 ft
18 ft
18.5"
Motor(s) Power Max Length Max Weight Control Board Operation
20 ft
20 ft
20 ft
20 ft
20 ft
22"
600 lbs Diamond Continuous
600 lbs Diamond DC Continuous
Eagle-100 Series
BY EAGLE ACCESS CONTROL SYSTEMS, INC.
28"
16"
750 lbs Diamond Continuous
1000 lbs Diamond Continuous
750 lbs Diamond Continuous
800 lbs Diamond DC Continuous
1000 lbs Diamond DC Continuous
Eagle-200 Series
BY EAGLE ACCESS CONTROL SYSTEMS, INC.
29.25"
17.5"
Battery Back-Up & Cycles
Power I (Optional) - 100
Built-in - 100
NOTE: The number of gate
cycles when using ONLY
battery back-up power are
approximate and WILL vary
depending on length and
weight of the gate.
Battery Back-Up & Cycles
Power I (Optional) - 40-80
Power II (Optional) - 40-80
Power I (Optional) - 40-80
Built-in - 100
Built-in - 100
NOTE: The number of gate
cycles when using ONLY
battery back-up power are
approximate and WILL vary
depending on length and
weight of the gate.