Receiving Faxes - Epson WorkForce 600 Series Quick Manual

■
To redial the last fax number you used, press
number is displayed on the screen.
■
Press
Menu
a different time to send your fax. (You cannot send or receive any faxes until
the delayed fax has been sent or cancelled.)
■
Press
Menu
machine to which you have dialed (such as a fax information service). Change
the setting back to

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the
setting that matches the size of paper you've loaded (see page 17). If the incoming
fax pages are larger than the paper size you loaded, the fax size is reduced to fit or
printed on multiple pages, depending on the
select.
If you run out of paper during printing, you see the error message
Load more paper and press the
To receive faxes automatically, make sure the
panel is turned on. To turn it on, press the
Note:
To change the number of rings before the WorkForce 600 Series answers, see
page 15.
To receive faxes manually, press the
(and the light). Then follow these steps:
1. When your telephone rings, lift the phone off the
hook. You see this screen:
2. Press
OK
3. If you want to receive the fax, press the
button.
4. After all the pages are received, you see the screen
shown above. Replace the phone on the hook.
22
Faxing a Document or Photo
, select
Fax Send Settings
and select
Poll to Receive
Sending
x Start
to select .
Receive
Redial/Pause
, and then
to receive a fax from another fax
when you're finished.
Automatic Reduction
button to continue.
Auto Answer
Auto Answer/Space
Auto Answer
x Start
. The last fax
Send Fax Later
Paper out
light on the control
button.
button to turn off this feature
to specify
Paper Size
setting you
.