Replacing Ink Cartridges - Epson WorkForce 600 Series Quick Manual

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the WorkForce 600 Series.
If a cartridge is low or expended, you see a message
on the display screen. Note which cartridges need to
be replaced and press
you have replaced any expended ink cartridges.)
If you're replacing a cartridge before you see a
message on the display screen, press the
button, press
Press or
l
Select
Ink Cartridge Replacement
2. Open the scanner, then open the cartridge cover.
40
Maintaining Your All-in-One
. (You cannot print until
OK
or to select
l r
to select
Maintenance
r
Home
, and press
Setup
and press
OK
and press
OK
.
OK
.
.