Table Of Contents; Introduction - Husqvarna DM 540i Operator's Manual

Introduction..................................................................... 7
Safety..............................................................................8
Assembly...................................................................... 14
Operation...................................................................... 14
Maintenance................................................................. 17
Troubleshooting............................................................ 19
Product description
The product is a handheld battery drill motor. This
product can also be used with a drill stand.
The product can be used for wet and dry operations.
To prepare the product for dry drilling on page
Refer to
15 and To prepare the product for wet drilling on page
16 .
The diamond drill bit is a hollow drill that has diamond
segments.
Product overview
(Fig. 1)
1. Drill spindle
2. Gearbox
3. Air intakes
4. Spirit level for horizontal operation
5. Control panel. Refer to
on page 12
6. On/Off button
7. Lock-on button
8. Power trigger
9. Handle
10. Air outlet
11. Spirit level for vertical operation
12. Battery holder
13. Gear selector
14. Connection for water or dust extractor
15. Auxiliary handle
16. Strainer
17. Dust extractor connector
18. Water connector
®
19. Gardena coupling
20. Adapter
21. Indicator for state of charge
22. Warning indicator
23. Battery charger (Accessory)
24. Warning indicator
25. Button, battery status
26. Battery status
27. Battery (Accessory)
1567 - 001 - 21.06.2021

Introduction

Functions of the control panel
Contents
Transportation, storage and disposal........................... 20
Technical data.............................................................. 20
Accessories.................................................................. 22
Service..........................................................................23
Declaration of Conformity............................................. 24
Registered trademarks................................................. 26
The product has embedded connectivity. Refer to
Embedded connectivity on page 8 .
Intended use
The product is used to drill concrete, rock, asphalt and
masonry. All other use is incorrect.
The product is used in industrial operations by operators
with experience.
28. Battery release button
29. Wrenches
30. Operator's manual
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
WARNING! This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always use approved personal protective
Personal protective
equipment. Refer to
equipment on page 12 .
This product complies with applicable EC
directives.
Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at an approved disposal
location for electrical and electronic
equipment.
If the product features Bluetooth
technology. The Bluetooth
marked on the product name label. Refer
®
wireless
®
symbol will be
7