Husqvarna DM 540i Operator's Manual page 21

Type
Features E-gear mode
Drill bit
Max. drill diameter in concrete, mm/in.
Min. drill diameter in concrete, mm/in.
Weight, kg/lb (without battery)
Water cooling
Water coupling
Maximum water pressure, bar
Tool connection
Spindle thread
Operating data
Speed spindle, no load E-gear 1, rpm
Speed spindle, no load E-gear 2, rpm
Drill diameter in concrete, mm/in.
Dust and slurry
Drill bit diameter to use a slurry ring, mm/inch
Sound levels
WARNING:
value has been measured in accordance
with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value may also
1
Noise emission
Sound pressure level, measured dB (A)
Sound power level, L
WA
Vibration levels when drilling into concrete, a
2
Main handle, m/s
1
The noise emission are measured in accordance with EN 62841-2-1.
• Uncertainty for the A-weighted sound pressure level K
• Uncertainty for the A-weighted sound power level K
2
Vibration level according to EN 62841-2-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1,5 m/s
1567 - 001 - 21.06.2021
Declared vibration total
dB (A)
h,DD
2
A-Rod/CRI 1 1/4"-7 UNC external, G 1/2" internal
Mech gear 1
770
1400
50-100/2-4
2
is 5 dB(A).
pA
is 5 dB(A).
pA
BLDC (brushless) 36V
2 gears
100/4
25/1
4.9/10.8
®
Gardena
3
Mech gear 2
15-50/1/2-2
25-100/ 1-4
be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission
during actual use of the power tool can differ
from the declared total value depending on
the ways in which the tool is used. Also the
need to identify safety measures to protect
the operator that are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating).
2400
4450
86
97
2.76
21