Restoring Default Settings - Epson Stylus Photo RX700 Basics Manual

■
: If your photo is too long or wide to fit inside the available space
Fit to Frame
on your selected layout, part of it will be automatically cropped when this
setting is . Select
On
at the edges of the photo. (This setting does not work with borderless layouts,
so be sure to select
Fit to Frame
turned on
■
Bidirectional
improve the print quality (but your photos print more slowly).

Restoring Default Settings

If you want to reset the print and copy settings to the RX700's original settings,
follow these steps:
1. Press the
Setup
2. Use the u and d buttons to choose
3. Press , then confirm as instructed to restore the settings.
OK
to turn off automatic cropping and leave white space
Off
with Borders
: Increases the print speed when turned
button.
as the Layout setting.)
Fit to Frame
turned off
Edge of paper
Restore to Factory Settings
Custom Printing Your Photos
. Select to
On Off
.
37