Scanning Problems; Scan Quality Problems - Epson Stylus Photo RX700 Basics Manual

Scanning Problems

The Stylus Photo RX700 doesn't scan film or slides.
■
Make sure you've removed the white document mat and the film holder is
positioned correctly (see page 19).
■
Make sure the cable from the scanner lid is securely connected to the
port in back of the RX700.
You're having problems scanning from your computer.
If the Stylus Photo RX700 is turned on but you cannot scan, check the following:
■
Make sure the USB cable is securely connected to your computer and the
RX700. If you're using a USB hub, try connecting the RX700 directly to your
computer's USB port instead.
■
If you're scanning from an application such as Adobe
the Stylus Photo RX700 is selected as the TWAIN source in your application.
■
If you see your Stylus Photo RX700 in the Windows Control Panel but you
can't scan, see the on-screen Reference Guide to uninstall the software. Then
follow the instructions on the Start Here sheet to reinstall it.
■
Make sure your system meets the requirements listed in the on-screen
Reference Guide. If you're scanning a large photo or at a high resolution, your
computer may not have enough memory to process the image.
See your on-screen Reference Guide for additional troubleshooting advice for
problems scanning from your computer.

Scan Quality Problems

Your scanned image has dust marks, streaks, or fingerprints.
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended). If the glass is still not clean, use a small amount of glass cleaner on
a soft cloth. Make sure you wipe off any remaining cleaner. Don't spray glass
cleaner directly on the glass.
® ®
Photoshop, make sure
Problems and Solutions
TPU
81