Table of Contents
Advertisement
2. Select the Device Management tab, then select the Date and Time > Time Server setting.
3. Set Use Time Server to Use.
4. Enter the time server address in Time Server Address. You can use the IPv4, IPv6, or FQDN
format for the address. You are limited to 252 characters.
5. Enter an update interval (up to 10080 minutes) in Update Interval (min).
6. Click OK to update the settings.
Parent topic:
Clearing the Internal Memory
You can delete the contents of the product's internal memory, such as password-protected print jobs and
downloaded PCL fonts and macros using the Web Config interface. You cannot select individual items to
delete.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Clear Internal Memory Data setting.
3. Select Delete and confirm your selection.
Parent topic:
Restoring Default Product Settings
You can reset the product to the default settings using the Web Config interface.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Restore Default Settings setting.
3. Select an option from the drop-down list. You can either restore network settings or all data and
settings.
4. Select Execute and confirm your selection to restore the product settings
Parent topic:
Configuring Security Settings
Follow the instructions in these sections to configure internal security features for your product using the
Web Config software.
Restricting Features Available for Users
Disabling the External Interface
Configuring Product Settings
Configuring Product Settings
Configuring Product Settings
329
Advertisement
Table of Contents
