Table of Contents
Advertisement
Set up your scanner with Socket Mobile Companion App.
Learn more about Application Mode.
Scan QR code with mobile device
Make sure the scanner is not connected to a host computer or device before scanning a com-
mand barcode.
Factory Reset
Configures the scanner to factory defaults. The scanner powers off after scanning this barcode.
Pairing Reset
If the scanner is paired with a device, unpair it before trying to connect to a different device.
Step 1: Scan barcode (for serial number that begins 1931 and above only).
Or follow steps to manually reset scanner:
A. Power on the scanner.
B. Press and hold down the scan button.
C. Press and hold down the power button.
D. After you hear 3 beeps, release both buttons.
The scanner will unpair and automatically power off.
Step 2: Remove or forget the scanner from the Bluetooth list
on the host device.
The scanner is now discoverable.
Both steps above must be done to complete the unpairing.
• Easy to follow instructions for pairing scanners
• Check scanner status
• Check warranty and register scanners
to download app.
Companion App
Scan QR code with mobile device
to download app.
resets
3
Advertisement
Table of Contents
