Set up your scanner with Socket Mobile Companion App.
Learn more about Application Mode.
Scan QR code with mobile device to
Make sure the scanner is not connected to a host computer or device before scanning a command
barcode.
Factory Reset
Configures the scanner to factory defaults. The scanner powers off after scanning this barcode.
Pairing Reset
If the scanner is paired with a device, unpair it before trying to connect to a different device.
Step 1: Scan barcode (for serial number that begins 1931 and above only).
Or follow steps to manually reset scanner:
A. Power on the scanner.
B. Press and hold down the scan button.
C. Press and hold down the power button.
D. After you hear 3 beeps, release both buttons.
The scanner will unpair and automatically power off.
Step 2: Remove or forget the scanner from the Bluetooth list on the
host device.
The scanner is now discoverable.
Both steps above must be done to complete the unpairing.
• Easy to follow instructions for pairing scanners
• Check scanner status
• Check warranty and register scanners
download app.
COMPANION APP
Scan QR code with mobile device to
download app.
RESETS
3