Table of Contents
Advertisement
Screw
Screw
ZCV39 / ZCV42
STEP 3: Place Lamps in position in firebox. Attach to fireplace with a single screw at the locations shown above for
each unit. Lamps can be placed facing upward or sideways. Replace burner and false bottom if used, along with pilot
shield.
STEP 4: Connect switch wires between lamp wire
and transformer (see schematic). Connect
remaining lamp wire to transformer. Transformer
can then be plugged in and the housing fastened
to the bottom of the fireplace.
Glass may be used to cover perforations in false bottom
ULK
TRANSFORMER
ASSEMBLY
120 VAC
43
ULK TRANSFORMER ASSEMBLY WHEN PLUGGED INTO FAN CONTROL MODULE
Advertisement
Table of Contents
