Table of Contents
Advertisement
ZCV39 / ZCV42
Step One: Frame Fireplace with nailing tabs oriented as
shown.
Step 3: A brick, tile, or other non-combustible border
may be applied over fireplace face to conceal border.
1-3/16" MIN
ZCV39
Fireplace
Opening
Bottom
of Unit
Basic Finishing 1: With Screen Only
Nailing Tab
Required
Clearance
Step Two: Use Drywall to finish face of wall.
NOTE: Drywall will be flush with fireplace face.
Fireplace Frame
IMPORTANT NOTE!:
If installing tile, brick, or other non-
combustible material around the perimeter of the screen: you
MUST Leave 1" of the face exposed around the fireplace
opening on the Bottom and Sides, and 1-3/16" exposed on the
top. This is to install and remove the safety screen. See
drawings below. A Tile Lip Kit is Available. Part No. ZCV-TLK
ZCV42
Fireplace
Opening
Bottom of Unit
Drywall
Required
Clearance
20
Advertisement
Table of Contents
