ABB CP420 Installation And Operation Manual page 21

Operation
While the operator terminal is uploading, the following is displayed:
After uploading, select File/Reconstruct Source in CP400Soft to display the
Open dialog. Open the uploaded application file (*.C64 or *.AA6). The appli-
cation screen will be displayed on the PC monitor. Finally, select File/Save As to
save the application as a *.V6F file. Thus a source file can serve the purposes of
maintenance and modification.
Note:
When uploading for the first time, make sure to first run the application once, or
else the upload function will not work.
ABB, 1SBC159102M0201 21