Power-up Default Settings and the
Introduction
Power-up Defaults Settings
Table 4
Power-Up Default Settings
Parameter
US trace separation
TOCO Baseline set-point
All alarm settings
Modem: Initialization string
Modem: Phone number
Chapter 4 - Power-up Default Settings and the Service Menu
This section discusses use of the Power-up Defaults Menu to configure power-
on default settings, and the Service Menu to obtain service-related information
about the monitor.
These are parameters which can be changed by the user. The power-up defaults
allow you to create a power-up default for many settings in the monitor. Power-
up defaults are the settings in effect each time the monitor is powered on.
The power-up default settings are configured at the factory prior to shipment.
Some of the parameters are stored when the monitor is powered down, and these
are classified as "saved through power cycle". The factory default values are
defined in Table 4.
Factory Default
"0"BPM
5
-
-----
-----
Service Menu
Saved Through Power Cycle
No
Yes
Yes
Yes
Yes
4
25