Non Functional Requirements; Start Up Behavior; Default/Reset Control Values; External Communication (Rs232) - Philips BDL3245E/00 Service Manual

5.

NON FUNCTIONAL REQUIREMENTS

5.1 Start up behavior

LED indication should respond in 1 seconds and picture shows up within 15 seconds (for
VIDEO, S-VIDEO, VGA and COMPONENT input), 15 seconds (for DVI input & Display Port), 15
seconds (for HDMI input) when the Display wakes from standby, or power on with DC switch or
cold start.
The first time AC On , power status is in Standby mode.

5.2 Default/Reset Control Values

The default/reset values (out-of-box setting) of the various controls are listed:
I/O:
Switch
AC
Power
Switch
Speaker
Switch
Startup, OSD Menu and PQ Values:
PICTURE DAC
V1.0_201101011B.xl

5.3 External communication (RS232)

5.3.1

Its default settings as follow:

Baud Rate : 9600
Data bits: 8
Parity : None
Stop Bit : 1
Flow Control : None
5.3.2

Timing between each message should be a minimum of 500 ms

5.3.3

There should be a menu selection

( e.g. in the service menu) for the baud rate of 1200,2400, 4800,9600, 19200,
57600, 115200
5.3.4

Philips SICP codes must be supported.

The SICP Commands
Document V1.6_2011
CLASS NO.
0.9
32"/42"/46" FHD LCD PUBLIC DISPLAY
2011-07-01
NAME SUPERS.
TY
CHECK DATE
2838 100 05424
Default
Position
ON
Internal
speaker
BDL3245E/BDL4245E/BDL4645E
PHILIPS
PHILIPS ELECTRONICS INDUSTRIES (TAIWAN) LTD.-C.E.
Property of
Page 26 of 38
10
A4
MMD Confidential