Olympus Evis Exera II Instructions Manual page 49

2.
Attach the cap to the main body (see Figure 3.11).
Figure 3.11
Inspection of the auxiliary water inlet cap
(for endoscopes with auxiliary water feeding only)
1.
Confirm that the auxiliary water inlet cap attached to the endoscope
connector has no dents, cracks or other irregularities (see Figure 3.12).
2.
If irregularities are observed, replace it with a new one as described in
"Attaching the auxiliary water inlet cap (for endoscopes with auxiliary water
feeding only)" on page 49.
Endoscope connector
Figure 3.12
EVIS EXERA II GIF/CF/PCF TYPE 180 Series OPERATION MANUAL
Cap Main body
Auxiliary water inlet
Chapter 3 Preparation and Inspection
Slit
Auxiliary water inlet cap
45