WEIHONG NK105 Manufacturer's Manual page 74

Bottom Process
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: Whether to enable bottom process.
Metric Size
• Unit: -
• Range: Yes ; No
• Default value: No
• Effective: Immediately
• Description: Whether to use metric size.
9.1.10.2 ENG File
Lifting Height
• Unit: mm
• Range: [0, 99999]
• Default value: 5
• Effective: Immediately
• Description: The lifting height of Z-axis during rapid traverse when an ENG file
is being processed.
Tool Change Tip
• Unit: -
• Range: Yes ; No
• Default value: Yes
• Effective: Immediately
• Description: Whether the prompt about tool change appears.
Deep Hole Mode
• Unit: -
• Range: 0 ; 1
• Default value: 0
• Effective: Immediately
• Description: The mode of machining deep holes.
– 0: Reciprocating chip removal.
– 1: High-speed reciprocating chip removal
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
68 / 97
上海维宏电子科技股份有限公司