Velocity; Returning To The Machine Origin Before Machining - WEIHONG NK105 Manufacturer's Manual

Nose Gap
• Unit: -
• Range: [-, Tool Diameter]
• Default value: 0.5
• Effective: Immediately
• Description: The distance between two adjacent toolpaths.

9.1.2 Velocity

G00 Speed
• Unit: mm/min
• Range: [Feedrate, Max Speed]
• Default value: 3600
• Effective: Immediately
• Description: The default speed of the machine tool during positioning.
Gxx Speed
• Unit: mm/min
• Range: [0, the smaller one of G00 Speed and Max Feedrate]
• Default value: 3600
• Effective: Immediately
• Description: The default speed of the machine tool during machining.

9.1.3 Returning to the Machine Origin before Machining

Back REF First
• Unit: -
• Range: Yes; No
• Default value: Yes
• Effective: Immediately
• Description: Whether returning to the machine origin before machining is
required.
It is recommended to return to the machine origin before machining, so as to
ensure the position accuracy and avoid deviation during machining.
If the position accuracy can be guaranteed, or you cannot return the axis to the
machine origin due to the origin switch error, set this parameter to No.
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
62 / 97
上海维宏电子科技股份有限公司