Wpim-Sy Features - Cabletron Systems WPIM-SY Management Manual

CHAPTER 1: INTRODUCTION
The following list briefly explains each chapter of the WPIM-SY manual:
Chapter 1, Introduction, outlines the contents of this manual, describes
WPIM-SY features, lists specifications, and concludes with a list of
related manuals.
Chapter 2, Local Management, describes how to use Local Management
to setup the WPIM-SY.
Appendix A, WAN Interface Cable Pinouts, provides Cabletron part
numbers, and detailed connector and pinout information for the interface
cables used with the WPIM-SY.
Appendix B, WAN Terms and Acronyms, is a brief glossary of the terms
used in this book.

1.2 WPIM-SY FEATURES

The WPIM-SY provides a synchronous serial connection to external
communications equipment (e.g., a multiplexer or CSU/DSU). The
WPIM-SY uses a subminiature 26-pin connector that supports the
following electrical signal interfaces:
• EIA-RS232D
• EIA-RS449
• EIA-RS530
• X.21
• V.35
• EIA-530A
1-2
1.2 Kbps - 19.2 Kbps
1.2 Kbps - 2.048 Mbps
1.2 Kbps - 2.048 Mbps
1.2 Kbps - 2.048 Mbps
1.2 Kbps - 2.048 Mbps
1.2 Kbps - 2.048 Mbps
WPIM-SY LOCAL MANAGEMENT GUIDE