Adjusting Space Operation Mode; Operation; Operation Mode; Preset Temperature - Vivax HPS-41CH120AERI/O3 R410a User Manual

VIVAX
Adjusting space operation mode
Adjusting space operation mode by interface
Go to ''MENU'' > ''OPERATION MODE'' .
Press"OK", the following page will appear:
There are three modes to be selected
including HEAT, COOL and AUTO mode. Use
the ''◄''， ''►'' to scroll, press "OK" to
select.
Even you don't press OK button and exit the
page by pressing BACK button, the mode
would still be effective if the cursor had been
moved to the operation mode.
If there is only HEAT (COOL) mode, the
following page will appear:
The operation mode can not be changed
See cool MODE SETTING on installation and
ower's manual.
If you
select:
Adjust space operation mode by the room
thermostat see room thermostat on
installation and ower's manual.
Go to MENU>OPERATION MODE, if you
press any key to select or adjust, the page will
appear:
OPERATION
Operation Mode
See "Adjusting space operation mode":
Preset Temperature
PRESET TEMPERATUER has PRESET TEMP.\
WEATHER TEMP. SET\ECO MODE 3 items.
PRESET TEMP
PRESET TEMP. function is used to set
different temperature on different time
when the heat mode or cool mode is on.

PRESET TEMP. = PRESET TEMPERATRE

The PRESET TEMP. function will be off in
these conditions.
1 ) AUTO mode is running.
2) TIMER or WEEKLY SCHEDULE is
12
Then the space operation mode is...
Always heating mode
Always cooling mode
Automatically changed by the software
based on the outdoor temperature
(and depending on installer settings of
the indoor temperature), and takes
monthly restrictions into account.
Note: Automatic changeover is only
possible under certain conditions.
See the ''FOR SERVICEMAN''> ''AUTO
MODE SETTING'' in "Installation and
owner's manual (M‐thermal split
indoor unit)".
.
running.
ENG