Clear Cmos - DFI CS332-C246/Q370 User Manual

X Rear I/O Ports
Overview
„ COM 1
„ LAN 4
„ VGA „ LAN 3
„ PS/2
„ USB 8 (USB 2.0)
„ USB 7 (USB 2.0)
„ LAN 1
„ USB 2 (USB 3.1 Gen 1)
„ USB 1 (USB 3.1 Gen 1)
Note:
The two LAN3/4 rear ports are optional components that may only be present in
certain models.
User's Manual | CS332
„ Line-out
„ Mic-in
„ DP++ 2
„ DP++ 1
„ LAN 2
„ USB 4 (USB 3.1 Gen 1)
„ USB 3 (USB 3.1 Gen 1)
Graphics Interfaces
„ VGA
„ DP++ 2
„ DP++ 1
The system board provides three display ports as listed below:
• 1 VGA port
• 2 DP++ ports
VGA Port
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin D-shell cable
connector to the VGA port. After you plug the monitor's cable connector into the VGA port, gen-
tly tighten the cable screws to hold the connector in place.
DP++ Port
The DP++ port which carries both digital audio and video signals is used to connect a LCD
monitor or a digital TV that has the DP++ port.
Driver Installation
Install the graphics driver. Refer to the chapter 4 for more information.
Chapter 2
HARDWARE INSTALLATION
17