Table of Contents
Advertisement
Rear I/O Ports
X
USB Ports
USB 8
USB 2.0
USB 7
USB 2
USB 4
USB 1
USB 3
USB 3.1 Gen 1
10
USB 5/6
USB 3.1 Gen 1
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The system board is equipped with four onboard USB 3.1 Gen 1 rear ports (USB 1/2/3/4), two
USB 2.0 rear ports (USB7/8), two USB 3.1 Gen 1 box header internal ports (USB 5/6) four USB
2.0 pin header internal ports (USB 9/10/11/12), and one USB 2.0 box header internal port (USB
13).
User's Manual | CS332
1
1
2
10
2
USB 13
USB 2.0
USB 9/10 (left), 11/12 (right)
USB 2.0
The internal USB pin headers may be connected to a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis and then insert the USB port
cables to a connector.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
„ USB 3.1 Gen 1 (USB 5/6) Pin Assignment
Pin
Assignment
1
VCC
2
USB3_RX6-
3
USB3_RX6+
4
GND
5
USB3_TX6-
6
USB3_TX6+
7
GND
8
Data6-
9
Data6+
10
5V
Chapter 2
HARDWARE INSTALLATION
Pin
Assignment
11
Data5+
12
Data5-
13
GND
14
USB3_TX5+
15
USB3_TX5-
16
GND
17
USB3_RX5+
18
USB3_RX5-
19
VCC
19
Advertisement
Table of Contents
