Daily Care And Report - Navistar MaxxForce DT 9 Operation And Maintenance Manual

Table of Contents

Advertisement

Daily Care and Report

WARNING: To prevent personal injury or death, read
all safety instructions in the "Safety Information" section of
this manual.
WARNING: To prevent personal injury or death, shift
transmission to park or neutral, set parking brake, and block
wheels before doing diagnostic or service procedures.
Check the following before engine operation to prevent engine
failure. Report all problems for immediate service.
Oil level.
Oil, air, fuel or coolant leaks.
Cooling system hoses for leaks
Coolant system level
Excessive use of crankcase lubricating oil, coolant, battery
fluid or fuel.
Unusual engine noise.
Correct amount of electrolyte, if not a maintenance free
battery.
Condition of electrical equipment
Page 98
SECTION 7 – SERVICE RECORDS
Do the following before engine operation to prevent engine
failure.
Form No. 1172040R1
Printed in the United States of America
Add coolant if necessary. Make sure filler cap seal is in good
condition and the cap is installed tightly.
Check air cleaner indicator with engine running. When the
yellow position indicator reaches and locks in the red zone,
a new air filter should be installed.
Fill the fuel tank with correct fuel.
Drain water from the fuel filter housing.
Clean external surfaces of the engine, radiator, and
accessories.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxxforce dt 10

Table of Contents