CDN ProAccurate DT450X Quick Start Manual

Perfect For
• Thin cuts of meat, fish or poultry
Easy To Use
• 6-8 second response
• Data-hold
• Big digit
• Temperature guide
Features
• NSF Certified
®
• 2.5 mm thin tip
• 2.75"/7.0 cm stem
• Waterproof
• Shatterproof
• Food-safe ABS plastic with BioCote
• Stainless steel stem
• On/off button
• Auto-off after 10 minutes
• Sheath can be used as handle extension
• 2-way mounting: pocket clip/hook
• Battery & instructions included
Note: Remove sticker from display before use.
Waterproof Pocket Thermometer
Note:
buttons are shown in CAPS. Function information that appears
on the display is shown in BOLD CAPS.
Battery Installation
The battery is installed. Replace battery when LCD
becomes dim.
1. To replace battery, open circular door on rear
with a coin.
2. Replace battery with a new LR44, or equivalent.
3. Replace door cover.
Operating Instructions
A. Temperature Measurement
1. Remove protective sheath from stem by pulling
2. Press ON/OFF to turn the DT450X on.
®
3. Select °F or °C temperature display by pressing
4. The temperature sensor is in the bottom 0.5" of
B. Data-Hold
1. Before withdrawing the DT450X from the
2. After use, press the ON/OFF button to turn the
Note:
-40 to +450°F/-40 to +230°C
In the following instructions, names of the control
sheath straight off.
the °F/°C button.
the stem. Therefore, insert the stem at least 0.5"
into the food to assure an accurate reading.
food, press the HOLD button. This will "hold"
the reading until the HOLD button is pressed
again or until the unit automatically shuts off.
An H appears to the right of the reading when
the hold feature is engaged. When the HOLD
button is pressed again, the display shows the
present temperature.
DT450X off and conserve battery life.
Clean the thermometer stem before each use.
Model: DT450X
ProAccurate
®